Amspa Engineering P. Limited
Tal Haveli, Pune, Maharashtra
GST No. 27AAICA2338J1ZM
TrustSEAL Verified
Call 0804860341333% Response Rate
SEND EMAIL
Product Details:
| Motor Horsepower | 1 HP |
| Brand | AMSPA |
| Max Flow Rate | 80 LPM |
| Head | 15 M |
| Model | B-80Ex |
| Motor Phase | Single Phase |
| Material | Cast Iron |
| Color | Blue |
Product Details:
| Brand | Amspa |
| Type | Rotary Vane Pump |
| Body Material | Cast Iron |
| Voltage | 220 V |
| Head | 7 Meters |
| Max. Speed | 2800 RPM |
| Power | 550W |
| Pump Inlet | 1" |
| Outlet | 1" |
| Maximum Flow Rate | 60 LPM |
| Suction | 5 Meter |
Additional Information:
Product Details:
| Model | B-70 DC |
| Max Flow Rate | 70 LPM |
| Head | 10 Meters |
| Speed Rpm | 2800 RPM |
| Material | Cast Iron |
| Brand | Amspa |
| Voltage | 12V/24V DC |
| Power | 550 W |
| Inlet/Outlet | 1" |
Positive Displacement, Rotary Vane Pump for transferring Diesel Fuel. Suitable for Diesel, Kerosene, Bio Diesel. Ideal for mounting into plant equipment, excavators etc. Vane Pump with rotor. Foot mounting plate. By pass valve incorporated into pump body. Integrated ON/OFF switch.
Product Details:
| Type of Motor | AC |
| Max Flow Rate | 80 LPM |
| Brand | Amspa |
| Machine Type | Manual |
| Head | 15 Meter |
| RPM | 2800 |
| Phase | Single Phase |
| Power | 1 HP |
| Model Number | B-80TSN120 |
| Suction | 5 Meter |
Explosion Proof Induction Motor with Aluminum Casing, Electric Self Priming Pump for flammable media. Gasoline, Diesel, Kerosene. Rotary Vane Pump with built in bypass valve. Built in Filter. Continuous working principle. Applicable for transferring media from barrel, underground and overhead tanks.
Product Details:
| Brand | Amspa |
| Power Source | DC Powered |
| Material | Pump Body: Brass, Shaft: Steel |
| Voltage | 12V DC |
| Seal | Fluoro Elastomer Lip Seal |
| Flow Capacity | 14 Litre Per Minute |
| Self-Priming | Max. Lift 3M, Can be mounted in any position |
| Twin Core Wire Current Draw | 6 Amp (max. 10 Amp) |
| Dimensions | Length 155.5mm x Width 119mm x Height 103mm |
| Model Number | B-14 |
This pump is a gear pump, the best kind of pump for oil scavenging. Bronze gears. Brass pump body.
12v DC with splash resistant wiring. Two 1/2" barbed fitting included.
The same oil that it scavenges also lubes up its gears. These pumps are suitable for remote systems as oil scavenge pumps.
Product Details:
| Brand | AMSPA |
| Max Flow Rate | 70 LPM |
| Power Source | Air Operated |
| Head | 4 Meter |
| Material | Stainless Steel |
| Material Grade | SS316 |
| Inlet Diameter | 40 mm |
| Outlet Diameter | 25 mm |
| Air Hose Diameter | 8 mm |
| Safety Valve Pressure | 0.03 MPa |
| Air Pressure | Greater Than 0.1 MPa |
| Length of The Pump | 1.12 Meter |
| Weight | 6 Kg |
Product Details:
| Minimum Order Quantity | 1 Piece |
| Power Source | AC Powered |
| Phase | Single Phase / Three Phase |
| Max Flow Rate | 75 LPM |
| Design Type | Gear Pump |
| Motor Horsepower | 1 HP |
| Model | B-75 |
| Head | 30 m |
| Brand | AMSPA |
| Model Name/Number | B-75 |
| Maximum Pressure | 3 Bar |
| Frequency | 50 Hz |
| Voltage | 220V / 415V |
| Type Of Pump | Internal Gear Pump(Gerotor) |
| Usage/Application | Oil |
| Maximum Discharge Flow | 75 LPM |
Additional Information:
Product Details:
| Head | 30 Meter |
| Usage/Application | Industrial |
| Motor Horsepower | 1 HP |
| Brand | Amspa |
| Material | Cast Iron |
| Nominal Displacement | 75 LPM |
| Phase | Single Phase 220V |
| Working Principle | Double Gears |
| Maximum Operating Temperature | 80 degree C |
| Max Viscosity | 300 CST |
| Drive Rating | 1 HP |
| In/Out Caliber | 25mm |
| Discharge Side Pressure | 3 Bar |
| Flow Rate | 75 LPM |
| Negative Suction | 3 Meter |
| Voltage | 230 V |